After the launch of iOS 16/15, lots of people are experiencing AirPods are not connecting error, and they don’t know how to fix the problem. No concern about what you do, you can’t get your devices to connect via Bluetooth. In this article, we explained what to do when your Air Pods are not pairing to your iPhone and MacBook.
How to Fix Common AirPods Not Connecting Problems
It isn’t easy to figure out the issue. But what do you have to do if your AirPods are not pairing to your iPhone or iPad? Below we have shared issues and solutions that you have to apply in these circumstances
also, check our useful Guide: AIRPODS MICROPHONE NOT WORKING
Solving Patchy Audio and Static Problems
If you’re having audio problems together with your AirPods, you would possibly be too far away from your source. Apple’s AirPods boast a powerful range of around 100 feet. But this will dip dramatically once you introduce obstacles like walls or sources of interference.
If you’ll put your source device (like an iPhone or iPod) in your pocket, this would possibly not be a drag anymore. For static sources sort of a computer, you will have to remain within range for optimal audio quality. It is also possible for sources of interference to scale back the scope of your AirPods.
In particular, Wi-Fi is understood to interfere with the W1 chip inside your AirPods. You’ll help reduce this problem by turning off Wi-Fi on your iPhone or moving to a different area to require a call. You’ll try using your Mac to isolate areas of high Wi-Fi interference.
Stop Audio Playing and Pausing Erratically
Your AirPods have closeness sensors on them, which identify once you put them in or take them out of your ears. Doing so will automatically play or pause content except you’ve defined unless. If your content stays while your AirPods are still in your ears, there could also be a drag with these sensors.
You can break the feature in your AirPod settings under Settings > Bluetooth >AirPods. Please tap on the (i) next to your AirPods and toggle Automatic Ear Detection off. This may reduce battery life since your AirPods will use an equivalent amount of power whether you’re wearing them or not.
You may also want to undertake to reset your AirPods, as discussed below. If you think that there is a query together with your AirPods and you cannot resolve this problem. It is best to contact Apple Support for a possible repair or replacement.
Automatic Ear Detection Not Working
Automatic Ear Detection pauses your music or other content once you exclude the AirPods from your ears. If this does not happen for you, first check you’ve got the feature enabled. Head to Settings > Bluetooth >AirPods, tap on the (i) next to your AirPods, then confirm Automatic Ear Detection is on.
Next, confirm your AirPods are clean! The proximity sensor won’t work if ear wax or other gunk is covering it. This may cause your earphones to behave as if they’re always in your ears. Do not forget to wash the case (it’s easy with a cotton swab and a few isopropyl alcohols). While you’re at it, why not give your iPhone an honest clean too?
AirPods Not Connecting to Your iPhone
If you cannot connect your AirPods to your iPhone, try setting them back to the battery case and waiting around 15 seconds. Take them out again, then try reconnecting. You’ll manually force the connection by the opening center, and tapping on the top-right corner of the Now Playing box (pictured below). And manually selecting your AirPods.
The problem could also be isolated to your iPhone. Try impairing Bluetooth by toggling Airplane Mode on and off again (access center, tap on the plane icon, wait a couple of seconds, then tap it again). If this still doesn’t run, restarting your iPhone may do the trick.
Still, got problems? Reset your AirPods as per the below instructions and check out pairing them again. If you do not see any LEDs, your AirPods are out of battery. Charge them for a couple of minutes then try again.
Reset Your Airpods
If the above steps don’t work for you, you may have to reset your airpods and pair them with your iPhone and iPad again.
- Launch the settings app and click on Bluetooth.
Tip: you can also access the Bluetooth settings by bringing the control center and long-pressing the widget with the Bluetooth icon until it expands to fill the display. In the widget, long-press the widget with the Bluetooth icon in it until it expands to show closeby Bluetooth devices, and then click on Bluetooth settings in the popup.
- Click on the info icon, the one that likes an “i” inside a circle, next to your airpods.
- Choose to Forget this device.
- Place the airpods in the case, shut the lid, and wait for 30 seconds.
- Now, open the lid, and hold the setup button on the back of the case until the status light flashes amber a few times, followed by constantly flashing white.
- Then, reconnect your airpods.